# 2.2 Parking Lock, Removing and Installing – 7-speed DSG gearbox 0AM (DQ200)

> DSG 0AM parking lock, removing and installing on the VW Polo 6R/6C: 7 steps, tightening torques and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-removing-and-installing/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- 35 – Gears, Shafts, [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)
- Previous procedure: [2.1 Parking Lock Cover, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-cover-removing-and-installing/index.md)
- Next procedure: [3 Special Tools](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/special-tools/index.md)

**Removing**

- The transmission is installed.

![](https://catalog.polo.blue/manuals/vw-polo-gearbox-0am-dsg/e49c00c4ca8064e1.webp)

- Remove the cover from the parking lock -1-. Refer to [⇒ 2.1 Parking Lock Cover, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-cover-removing-and-installing/#t205-146).

![](https://catalog.polo.blue/manuals/vw-polo-gearbox-0am-dsg/0ce604ab77bb8fca.webp)

- Remove the bolts -2- and pull the parking lock -1- off the alignment sleeves -arrows-.

It the parking lock cannot be removed by hand:

- Mount Slide Hammer Set - VW771- with Slide Hammer Set - Hook - VW771/37- behind the parking lock and remove it by pulling alternating from side to side.
- Always replace the bolts -2-.

**Installing**

- Place the parking lock -1- on the alignment sleeves -arrows-.
- Install new bolts -2-.
- Install the cover for the parking lock -1-. Refer to [⇒ 2.1 Parking Lock Cover, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/35-gears-shafts/parking-lock-cover-removing-and-installing/#t205-146).

**Tightening Specifications**

| Component | Tightening Specification |
| --- | --- |
| Parking lock to the transmission housing • Replace the bolts after removing them. | 20 Nm +90° |

## Tightening torques on this page

### Torque
| Part | Torque |
| --- | --- |
| Parking lock to the transmission housing • Replace the bolts after removing them. | 20 Nm +90° |
