# 1.1 Overview – Dual Clutch, through Transmission Production Date 05/2011 – 7-speed DSG gearbox 0AM (DQ200)

> VW Polo 6R/6C, step by step: dual clutch overview, DSG 0AM built up to 05/2011 – tightening torques. Danger of causing damage to the clutch adjusting tool.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-up-to-05-2011/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- 30 – Clutch, [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)
- Previous procedure: [1 Dual Clutch, Removing and Installing, through Transmission Production Date 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-installing-up-to-05-2011/index.md)
- Next procedure: [1.2 Dual Clutch, Removing, through Transmission Production Date 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-up-to-05-2011/index.md)

> **Caution**
>
> Danger of causing damage to the clutch adjusting tool.
>
> - The clutch is self-adjusting. Vibrations can affect the adjusting tool. Be careful not to drop the clutch into the transmission when installing.
> - Do not install a clutch that has fallen onto a hard surface or shows signs of damage.

![](https://catalog.polo.blue/manuals/vw-polo-gearbox-0am-dsg/e1d4dd00a0e73c45.webp)

- **1** Circlip
  - Always replace after removing
- **2** Hub
- **3** Circlip
  - Always replace after removing
- **4** Large Engaging Lever for “K 1”
  - With large engaging bearing
  - Always replace when replacing the dual clutch
- **5** Small Engaging Lever for »K 2«
  - Always replace when replacing the dual clutch

6 - Bolts

- 8 Nm +90°
- Always replace after removing

- **7** Support
  - For engaging lever
  - Always replace when replacing the dual clutch
- **8** Bracket
  - For small engaging lever
  - Not equipped on some older transmissions
  - Always replace when replacing the dual clutch
- **9** Seal
  - For the inner input shaft
  - Replacing. Refer to [⇒ 3 Clutch-Side Seals, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/clutch-side-seals-removing-and-installing/#t67-89).
- **10** Seal
  - For the outer input shaft
  - Replacing. Refer to [⇒ 3 Clutch-Side Seals, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/clutch-side-seals-removing-and-installing/#t67-89).
- **11** Outer Input Shaft
- **12** Shim “SK 2”
  - Selecting thickness. Refer to [⇒ 1.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date through 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-up-to-05-2011/#t24-531).
- **13** Shim “SK 1”
  - Selecting thickness. Refer to [⇒ 1.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date through 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-up-to-05-2011/#t24-531).
- **14** Small Engaging Bearing for »K 2«
  - Refer to [⇒ 1.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date through 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-up-to-05-2011/#t24-531) 
- **15** Dual Clutch
  - Removing. Refer to [⇒ 1.2 Dual Clutch, Removing, through Transmission Production Date 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-up-to-05-2011/#t21-166).
  - Installing. Refer to [⇒ 1.4 Dual Clutch, Installing, Transmission Production Date through 05/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-installing-up-to-05-2011/#t37-82).

## Tightening torques on this page

### In the steps
| Step | Torque |
| --- | --- |
| 6 - Bolts | 8 Nm +90° |
