# 2.1 Overview – Dual Clutch, Transmission Production Date from 06/2011 – 7-speed DSG gearbox 0AM (DQ200)

> VW Polo 6R/6C, step by step: dual clutch overview, DSG 0AM built from 06/2011 – tightening torques and 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-from-06-2011/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- 30 – Clutch, [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)
- Previous procedure: [2 Dual Clutch, Removing and Installing, from Transmission Production Date 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-installing-from-06-2011/index.md)
- Next procedure: [2.2 Dual Clutch, Removing, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-from-06-2011/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-gearbox-0am-dsg/88e6e184fa47820c.webp)

- **1** Engaging Lever Support
  - For the large engaging lever “K 1”
  - Is not replaced
- **2** Ball Stud
  - For the small engaging lever “K 2”
  - Always replace when replacing the dual clutch
- **3** Shim “SK 1”
  - Selecting thickness. Refer to [⇒ 2.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-from-06-2011/#t49-531).
- **4** Shim “SK 2”
  - Selecting thickness. Refer to [⇒ 2.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-from-06-2011/#t49-531).
- **5** Small Engaging Bearing for “K 2”
  - Always replace when replacing the dual clutch
- **6** Dual Clutch
  - Removing. Refer to [⇒ 2.2 Dual Clutch, Removing, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-removing-from-06-2011/#t46-281).
  - Installing. Refer to [⇒ 2.4 Dual Clutch, Installing, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-installing-from-06-2011/#t62-82).
- **7** Circlip
  - Always replace after removing
- **8** Hub
- **9** Circlip
  - Always replace after removing
- **10** Large Engaging Lever for “K 1”
  - With engaging bearing
  - Always replace when replacing the dual clutch
- **11** Guide Sleeve Upper Section
  - For the small engaging lever “K 2”
  - Removed and installed together with the guide sleeve lower section
- **12** Small Engaging Lever for “K 2”
  - Is removed and installed together with the guide sleeve upper section and lower section
  - Refer to [⇒ 2.3 K 1 and K 2 Clutch Engaging Bearing Position, Adjusting, Transmission Production Date from 06/2011](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/k1-k2-engaging-bearing-position-adjusting-from-06-2011/#t49-531) 
- **13** Bolts
  - 8 Nm +90°
  - Always replace after removing
- **14** Guide Sleeve Lower Section
  - For the small engaging lever “K 2”
  - Removed and installed together with the guide sleeve upper section
- **15** Seal
  - For the inner input shaft
  - Replacing. Refer to [⇒ 3 Clutch-Side Seals, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/clutch-side-seals-removing-and-installing/#t67-89).
- **16** Seal
  - For the outer input shaft
  - Replacing. Refer to [⇒ 3 Clutch-Side Seals, Removing and Installing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/clutch-side-seals-removing-and-installing/#t67-89).

## Tightening torques on this page

### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/30-clutch/dual-clutch-overview-from-06-2011/#t44-427)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 13 | Bolts | 8 Nm +90° | Always replace after removing |
