# 5 Safety Precautions – 7-speed DSG gearbox 0AM (DQ200)

> Safety rules for work on the DSG gearbox 0AM (DQ200): general precautions, cars with a start/stop system and road tests with testing equipment.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/safety-precautions/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- 00 – General, Technical Data, [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)
- Previous procedure: [4 Capacities](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/capacities/index.md)
- Next procedure: [6 Tow Starting and Towing Notes](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/tow-starting-and-towing-notes/index.md)

## 5.1 General Safety Precautions

To avoid personal injury and damage to the vehicle, observe the following:

> **Warning**
>
> Risk of injury and accident by accidentally engaging a gear with the engine running.
>
> - Move the selector lever into “P” and set the parking brake before working on a running engine.

To prevent personal injury and damage to the electrical/electronic components, note the following:

- Only connect and disconnect test equipment when the ignition is off.

> **Caution**
>
> Risk of destroying electronic components when disconnecting the battery.
>
> - Follow the steps when disconnecting the battery.
> - Always turn off the ignition before disconnecting the battery.

- Disconnect the battery. Refer to ⇒ Electrical Equipment; Rep. Gr. 27; Battery; Battery, Disconnecting and Connecting.

## 5.2 Safety Precautions when Working on Vehicles with Start/Stop System

Note the following when working on vehicles with a Start/Stop System:

> **Warning**
>
> Risk of injury if the engine starts automatically in vehicles with a Start/Stop System.
>
> - For vehicles with an activated Start/Stop System (recognizable from a notification in the instrument cluster), the engine can be started automatically if needed.
> - For this reason make sure the Start/Stop System is disabled when working on the vehicle (turn off ignition, if needed, turn the ignition back on).

## 5.3 Safety Precautions during Road Test with Testing Equipment

Performing road tests while using testing equipment:

> **Warning**
>
> There is a risk of an accident due to distractions and improperly secured testing equipment.

The front passenger airbag poses a risk if it deploys during an accident.

- Operating testing equipment while driving is a distraction.
- Testing equipment that is not secured properly increases the risk of personal injury.
- Always secure testing equipment on the rear seat with a strap and have a second technician operate it from the rear seat.
