# 4 Capacities – 7-speed DSG gearbox 0AM (DQ200)

> VW Polo 6R/6C, step by step: DSG 0AM oil capacities: gearbox oil and mechatronic fluid – 1 drawing.

- Web page: https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/capacities/
- Original document: https://cdn.polo.blue/files/7-speed_dual_clutch_transmission_0am-eng.pdf
- 00 – General, Technical Data, [7-speed DSG gearbox 0AM (DQ200)](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/index.md)
- Previous procedure: [2 Overview – Transmission](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/overview-transmission/index.md)
- Next procedure: [5 Safety Precautions](https://catalog.polo.blue/repair-manuals/dsg-gearbox-0am-dq200/00-general-technical-data/safety-precautions/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-gearbox-0am-dsg/bea0d444fe6bc08f.webp)

The 7-Speed DSG® transmission has two separate, different fluid systems. One for the transmission fluid -arrow A- and one for the hydraulic fluid -arrow B-.

| Capacities | Transmission Fluid |
| --- | --- |
| Refill | Refer to ⇒ Fluid Capacity Tables; Rep. Gr. 03 |
| Change | No change required |
| Grease | Transmission fluid for DSG® transmission 0AM. Refer to the Parts Catalog for the part number. |

| Capacities | Hydraulic fluid in DSG Transmission Mechatronic - J743- |
| --- | --- |
| Refill | Refer to ⇒ Fluid Capacity Tables; Rep. Gr. 03 |
| Change | Change not possible Checking the hydraulic fluid level for the DSG Transmission Mechatronic - J743- is not possible. |
| Grease | Hydraulic oil. Refer to the Parts Catalog for the part number. |

For more details, refer to the part number on the container.

> **Caution**
>
> Risk of damaging the transmission.
>
> - Use only the transmission fluid specifically for the 7-speed DSG® transmission 0AM. It is available as a replacement part. Refer to the Parts Catalog.
> - Using other fluids can cause malfunctions or transmission failure.
> - Checking the hydraulic fluid level in the DSG Transmission Mechatronic - J743- is not possible. The vent on the DSG Transmission Mechatronic - J743- must be sealed tight before performing any assembly work.
> - Fluid that has leaked out of the DSG Transmission Mechatronic - J743- hydraulic area may not be refilled or checked.
> - If transmission fluid has leaked out, then it is necessary to perform a transmission fluid replacement. It is not possible to check the fluid level.
> - Underfilling or overfilling both fluid systems will impair the function of the transmission.
