# 5.9 Removing and installing brake light switch F, right-hand drive – Brake systems

> Removing and installing brake light switch F, RHD on the VW Polo 6R: 8 steps, tightening torques and 2 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/brake-systems/47-brakes-hydraulics/removing-and-installing-brake-light-switch-f-rhd/
- Original document: https://cdn.polo.blue/files/vw-polo-5-2010-brake-systems-eng.pdf
- 47 – Brakes - hydraulics, [Brake systems](https://catalog.polo.blue/repair-manuals/brake-systems/index.md)
- Previous procedure: [5.8 Removing and installing brake light switch F, left-hand drive](https://catalog.polo.blue/repair-manuals/brake-systems/47-brakes-hydraulics/removing-and-installing-brake-light-switch-f-left-hand-drive/index.md)
- Next procedure: [6.1 Removing and installing brake master cylinder, left-hand drive](https://catalog.polo.blue/repair-manuals/brake-systems/47-brakes-hydraulics/removing-and-installing-brake-master-cylinder-lhd/index.md)

**Removing**

- Remove noise insulation ⇒ General body repairs, exterior; Rep. gr. 50; Front of body.

![](https://catalog.polo.blue/manuals/vw-polo-2010-brake-systems/b4229fcc108009d2.webp)

- Undo bolt -arrow B- of brake light switch - F- -1- from brake master cylinder.
- Pull brake light switch - F- -1- out of brake master cylinder upwards.
- Pull brake light switch - F- -1- out of brake master cylinder locking lug -arrow A-.
- Remove brake light switch - F- together with wiring.
- Release connector of brake light switch - F- and pull it off.

**Installing**

Install in reverse order. Note the following points:

![](https://catalog.polo.blue/manuals/vw-polo-2010-brake-systems/d22a3bb53bc734eb.webp)

- Insert brake light switch - F- -1- into brake master cylinder locking lug -arrow A-.
- Screw in bolt -arrow B- and tighten.

**Specified torque**

| Component | Specified torque |
| --- | --- |
| Brake light switch - F- to brake master cylinder | 7 Nm |

## Tightening torques on this page

### Torque
| Part | Torque |
| --- | --- |
| Brake light switch - F- to brake master cylinder | 7 Nm |
