# 7.2 Removing and installing parts of anti-lock brake system on rear axle (drum brakes) – Brake systems

> VW Polo 6R, step by step: removing and installing rear ABS parts (drum brakes) – 7 steps, tightening torques and 3 drawings.

- Web page: https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-abs-parts-rear-drum-brakes/
- Original document: https://cdn.polo.blue/files/vw-polo-5-2010-brake-systems-eng.pdf
- 45 – Anti-lock brake system, [Brake systems](https://catalog.polo.blue/repair-manuals/brake-systems/index.md)
- Previous procedure: [7.1 Removing and installing parts of ABS system on front axle](https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-parts-of-abs-system-on-front-axle/index.md)
- Next procedure: [7.3 Removing and installing parts of anti-lock brake system on rear axle (disc brakes)](https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-abs-parts-rear-disc-brakes/index.md)

![](https://catalog.polo.blue/manuals/vw-polo-2010-brake-systems/6f0bd05305a8e9dd.webp)

- **1** Axle beam
- **2** Hexagon socket head bolt, 8 Nm
- **3** ABS speed sensor
  - Before inserting sensor, clean hole inner surface and coat with high-temperature paste G 052 112 A3.
  - Removing and installing [⇒ 7.2.1 Removing and installing speed sensor on rear axle (drum brakes)](https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-abs-parts-rear-drum-brakes/#t63-82).
- **4** Brake line
- **5** Stub axle
- **6** Handbrake cable
- **7** Hexagon bolt
  - Specified torque ⇒ Running gear, axles, steering; Rep. gr. 42; Assembly overview: wheel bearings, drum brakes.
- **8** Torx bolt, 4 Nm
- **9** Brake drum
  - Reset brake before removing brake drum [⇒ 2.2 Resetting brake](https://catalog.polo.blue/repair-manuals/brake-systems/46-brakes-mechanism/resetting-brake/#t81-290).
- **10** Cap
  - Pressing off and driving in ⇒ Running gear, axles, steering; Rep. gr. 42; Assembly overview: wheel bearings, drum brakes.
- **11** 12-point nut (self-locking)
  - Renew each time after removal ⇒ Running gear, axles, steering; Rep. gr. 42; Assembly overview: wheel bearings, drum brakes.
- **12** Wheel hub with wheel bearing
  - ABS sensor ring is installed in wheel bearing [⇒ 7.2 Removing and installing parts of anti-lock brake system on rear axle (drum brakes)](https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-abs-parts-rear-drum-brakes/#t62-638).
  - Removing and installing ⇒ Running gear, axles, steering; Rep. gr. 42; Assembly overview: wheel bearings, drum brakes.
- **13** Brake backplate with brake shoes
  - Reset brake before removing brake drum [⇒ 2.2 Resetting brake](https://catalog.polo.blue/repair-manuals/brake-systems/46-brakes-mechanism/resetting-brake/#t81-290) 

![](https://catalog.polo.blue/manuals/vw-polo-2010-brake-systems/3a2e4e8f2fa99eea.webp)

**ABS sensor ring -1- **

## 7.2.1 Removing and installing speed sensor on rear axle (drum brakes)

Removing:

- Raise vehicle.

![](https://catalog.polo.blue/manuals/vw-polo-2010-brake-systems/c96023fce3a39a85.webp)

- Separate connector -1- from speed sensor wire and from speed sensor.
- Remove bolt -2- from stub axle.
- Pull ABS speed sensor out of stub axle.

Installing:

- Before inserting speed sensor, clean hole inner surface and coat speed sensor all-round with high-temperature paste G 052 112 A3.
- Insert speed sensor into hole in stub axle and tighten bolt to 8 Nm.
- Connect speed sensor to speed sensor wire.

## Tightening torques on this page

### Torque
| Item | Part | Torque |
| --- | --- | --- |
| 2 | Hexagon socket head bolt | 8 Nm |
| 8 | Torx bolt | 4 Nm |

### 7.2.1 Removing and installing speed sensor on rear axle (drum brakes) [To the steps](https://catalog.polo.blue/repair-manuals/brake-systems/45-anti-lock-brake-system/removing-and-installing-abs-parts-rear-drum-brakes/#7-2-1-removing-and-installing-speed-sensor-on-rear-axle-drum)
| Step | Torque |
| --- | --- |
| Insert speed sensor into hole in stub axle and tighten bolt to 8 Nm. | 8 Nm |
