# Tightening torques – Body repairs – exterior

> Every tightening torque the Body repairs – exterior manual gives for the VW Polo V, by repair group and procedure. Each one links to its drawing or table in the procedure.

- Web page: https://catalog.polo.blue/repair-manuals/body-exterior/torques/
- Original document: https://cdn.polo.blue/files/vw-polo-5-2014-body-repairs-exterior-eng.pdf
- [Body repairs – exterior](https://catalog.polo.blue/repair-manuals/body-exterior/index.md)

## 50 – Body - front

### [1.1 Assembly overview – lock carrier](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/assembly-overview-lock-carrier/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2.0 Nm | Qty. 2 |
| 4 | Bolt | 8.0 Nm | Qty. 3 on each side |
| 7 | Bolt | 8.0 Nm | Qty. 4 on each side |
| 10 | Bolt | 8.0 Nm | Qty. 2 on each side |
| 12 | Bolt | 30 Nm | Qty. 3 on each side |

### [2.1 Assembly overview – wing](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/assembly-overview-wing/index.md)

#### Torque
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 6 Nm | Qty. 1, A-pillar. · Qty. 1, side member · Qty. 1, wheel housing · Qty. 1, wing brace · Qty. 3, wing connection piece |
| 10 | Bolt | 6 Nm | Qty. 2 |

### [2.3 Removing and installing wing](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/removing-and-installing-wing/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 6 Nm. | 6 Nm |

### [2.4 Removing and installing wing bracket](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/removing-and-installing-wing-bracket/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -3 and 4-: 6 Nm. | 6 Nm |

### [3.1 Assembly overview – plenum chamber bulkhead](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/assembly-overview-plenum-chamber-bulkhead/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 25 Nm | Qty. 10 · Specified torque |

### [3.2 Assembly overview – plenum chamber bulkhead](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/assembly-overview-plenum-chamber-bulkhead-2/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/50-body-front/assembly-overview-plenum-chamber-bulkhead-2/#t26-82)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 8 Nm | Qty. 8 or 10, depending on the type · Specified torque |

## 55 – Bonnet, rear lid

### [1.1 Assembly overview – bonnet](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-bonnet/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-bonnet/#t32-384)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 7 | Hexagon nut | 20 Nm | Qty. 2 on each side for securing bonnet. · Qty. 2 on each side for securing hinge. · Specified torque |

### [1.3 Assembly overview – bonnet release lever](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-bonnet-release-lever/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-bonnet-release-lever/#t35-82)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 5 | Bolt | 2 Nm | Specified torque · Qty. 2 |

### [1.4 Removing and installing bonnet](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-bonnet/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for hexagon nuts -3-: 20 Nm. | 20 Nm |

### [1.6 Adjusting lid lock](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/adjusting-lid-lock/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 12 Nm | 12 Nm |

### [1.7 Adjusting striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/adjusting-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque of bolts -2-: 10 Nm. | 10 Nm |

### [1.8 Removing and installing bonnet lock](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-bonnet-lock/index.md)

#### 1.8.1 Removing and installing lid lock, LHD vehicle [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-bonnet-lock/#1-8-1-removing-and-installing-lid-lock-lhd-vehicle)
- 1.8.2 Removing and installing lid lock, RHD vehicle [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-bonnet-lock/#1-8-2-removing-and-installing-lid-lock-rhd-vehicle)

| Step | Torque |
| --- | --- |
| Specified torque for bolts -5-: 12 Nm. | 12 Nm |

### [1.10 Removing and installing striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque of bolts -3-: 10 Nm. | 10 Nm |

### [1.11 Removing and installing hinges](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-hinges/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 20 Nm. | 20 Nm |

### [2.2 Assembly overview – hinges](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-hinges/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-hinges/#t56-82)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 10 Nm | Qty. 2 for each hinge |
| 4 | Hexagon nut | 24 Nm | Qty. 2 |

### [2.3 Assembly overview – gas strut](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-gas-strut/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/assembly-overview-gas-strut/#t57-82)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 4 | Bolt | 8 Nm +90° | Qty. 2 |
| 5 | Ball-head pin | 20 Nm +45° |  |

### [2.4 Removing and installing rear lid](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-rear-lid/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -3-: 10 Nm. | 10 Nm |

### [2.6 Adjusting rear lid](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/adjusting-rear-lid/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolt -3-: 10 Nm. | 10 Nm |

### [2.7 Adjusting striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/adjusting-striker-pin-2/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -1-: 18 Nm. | 18 Nm |

### [2.9 Removing and installing bonnet lock](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-bonnet-lock-2/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 23 Nm. | 23 Nm |

### [2.10 Removing and installing operating mechanism](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-operating-mechanism/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolts firmly. Specified torque of bolts -4-: 4 Nm. | 4 Nm |

### [2.11 Removing and installing hinges](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-hinges-2/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for nuts -4-: 24 Nm. | 24 Nm |

### [2.12 Removing and installing striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-striker-pin-2/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 18 Nm. | 18 Nm |

### [2.14 Removing and installing gas strut](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/removing-and-installing-gas-strut/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for ball head pins -4-: 20 Nm + 90° | 20 Nm + 90° |
| Specified torque for bolts on ball-head pin retaining bracket: 10 Nm. | 10 Nm |

### [3 Tank flap unit](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/tank-flap-unit/index.md)

#### 3.1 Assembly overview - tank flap unit [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/tank-flap-unit/#3-1-assembly-overview-tank-flap-unit)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 1.5 Nm | Specified torque |

#### 3.2 Removing and installing tank flap unit [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/55-bonnet-rear-lid/tank-flap-unit/#3-2-removing-and-installing-tank-flap-unit)
| Step | Torque |
| --- | --- |
| Specified torque for bolt -2-: 1.5 Nm | 1.5 Nm |

## 57 – Front doors, door components, central locking

### [1.1 Assembly overview – door](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/assembly-overview-door/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening. |
| 4 | Bolt | 23 Nm | This bolt must be removed from hinge to remove door |
| 5 | Multi-point socket head bolt | 32 Nm | Installed from inside vehicle. · Always renew bolts after loosening |
| 7 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening |
| 8 | Bolt | 30 Nm | Unscrew and remove this bolt to remove the door. |
| 10 | Bolt | 9 Nm | Qty. 2 · For door arrester |
| 13 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening |
| 14 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening. |
| 16 | Bolt | 23 Nm | This bolt must be removed to remove door from hinge pin. |

#### In the steps
| Step | Torque |
| --- | --- |
| To loosen or tighten bolt, remove or install glove compartment on front passenger side ⇒ General body repairs, interior; Rep. gr. 68; Compartments/covers; Removing and installing glove compartment. | 32 Nm |

### [1.4 Removing and installing door](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-door/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -7-: 23 Nm. | 23 Nm |
| Specified torque for bolts -5-: 30 Nm. | 30 Nm |

### [1.5 Installing after renewing A-pillar](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/installing-after-renewing-a-pillar/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Insert door and tighten bolts -2, 5, 7 and 8- to 20 Nm and at 90°. | 20 Nm |

### [1.7 Adjusting striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/adjusting-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 20 Nm. | 20 Nm |

### [1.8 Removing and installing door arrester](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-door-arrester/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolts -3-, specified torque: 9 Nm. | 9 Nm |
| Tighten bolt -4-, specified torque: 30 Nm. | 30 Nm |

### [2.1 Assembly overview – door components](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/assembly-overview-door-components/index.md)

#### 2.1.1 Assembly overview – door components, 2-door model [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/assembly-overview-door-components/#2-1-1-assembly-overview-door-components-2-door-model)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 10 | Bolt | 18 Nm | Qty. 2 · Specified torque |

#### 2.1.2 Assembly overview – door components, 4-door model [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/assembly-overview-door-components/#2-1-2-assembly-overview-door-components-4-door-model)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 12 | Bolt | 18 Nm | Qty. 2 · Specified torque |

### [2.2 Assembly overview – door handle and door lock](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/assembly-overview-door-handle-and-door-lock/index.md)

#### Torque
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 3.5 Nm | For lock cylinder. |
| 8 | Bolt | 1.5 Nm | Mounting bracket is loosened from door when this bolt is loosened. |
| 11 | Bolt | 20 Nm | Qty. 2 |

### [2.4 Removing and installing window regulator motor](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-window-regulator-motor/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 3 Nm | 3 Nm |

### [2.5 Removing and installing window regulator](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-window-regulator/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Insert thread of window regulator through door -arrow c- and tighten hexagon nuts -4-; specified torque: 8 Nm. | 8 Nm |

### [2.7 Removing and installing striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Position striker pin -1- on pillar -3- and tighten bolts -2-; specified torque: 20 Nm. | 20 Nm |

### [2.9 Removing and installing lock cylinder](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-lock-cylinder/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -5 and 7-: 3.5 Nm. | 3.5 Nm |

### [2.12 Removing and installing door handle bracket](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-door-handle-bracket/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolt -2-, specified torque: 1.5 Nm. | 1.5 Nm |

### [2.13 Removing and installing door lock](https://catalog.polo.blue/repair-manuals/body-exterior/57-front-doors-door-components-central-locking/removing-and-installing-door-lock/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque of bolts -2-: 20 Nm. | 20 Nm |

## 58 – Rear doors, door components

### [1.1 Assembly overview – door](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/assembly-overview-door/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening. |
| 4 | Bolt | 23 Nm | This bolt must be removed from hinge to remove door |
| 5 | Multi-point socket head bolt | 32 Nm | Installed from inside vehicle. · Always renew bolts after loosening |
| 7 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening |
| 8 | Bolt | 30 Nm | Unscrew and remove this bolt to remove the door. |
| 10 | Bolt | 9 Nm | Qty. 2 · For door arrester |
| 13 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening |
| 14 | Multi-point socket head bolt | 32 Nm | Always renew bolts after loosening. |
| 16 | Bolt | 23 Nm | This bolt must be removed to remove door from hinge pin. |

#### In the steps
| Step | Torque |
| --- | --- |
| Remove B-pillar trim ⇒ General body repairs, interior; Rep. gr. 70; Trims, interior; Removing and installing B-pillar trim. | 32 Nm |

### [1.4 Removing and installing door](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-door/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -7-: 23 Nm. | 23 Nm |
| Specified torque for bolts -5-: 30 Nm. | 30 Nm |

### [1.5 Installing after renewing B-pillar](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/installing-after-renewing-b-pillar/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Insert door and tighten bolts -2, 5, 7 and 8- to 20 Nm and at 90°. | 20 Nm |

### [1.7 Adjusting striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/adjusting-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 20 Nm. | 20 Nm |

### [1.8 Removing and installing door arrester](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-door-arrester/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolts -3-, specified torque: 9 Nm. | 9 Nm |
| Tighten bolt -4-, specified torque: 30 Nm. | 30 Nm |

### [2.1 Assembly overview – door components](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/assembly-overview-door-components/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/assembly-overview-door-components/#t155-444)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 8 | Bolt | 18 Nm | Qty. 2 · Specified torque |

### [2.2 Assembly overview – door handle and door lock](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/assembly-overview-door-handle-and-door-lock/index.md)

#### Torque
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 5 | Bolt | 1 Nm | Mounting bracket is loosened from door when this bolt is loosened. |
| 10 | Bolt | 18 Nm | Qty. 2 |

### [2.4 Removing and installing window regulator motor](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-window-regulator-motor/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 3 Nm | 3 Nm |

### [2.6 Removing and installing window crank mechanism](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-window-crank-mechanism/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 3 Nm | 3 Nm |

### [2.7 Removing and installing window regulator](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-window-regulator/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Insert thread of window regulator through door and tighten hexagon nuts -2-; specified torque: 8 Nm. | 8 Nm |

### [2.9 Removing and installing striker pin](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-striker-pin/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Position striker pin -1- on pillar and tighten bolts -2-, tightening torque: 20 Nm. | 20 Nm |

### [2.12 Removing and installing door handle bracket](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-door-handle-bracket/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolt -4-, specified torque: 1 Nm. | 1 Nm |

### [2.13 Removing and installing door lock](https://catalog.polo.blue/repair-manuals/body-exterior/58-rear-doors-door-components/removing-and-installing-door-lock/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque of bolts -4-: 18 Nm. | 18 Nm |

## 60 – Sunroof

### [1.2 Assembly overview – sliding sunroof](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/assembly-overview-sliding-sunroof/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/assembly-overview-sliding-sunroof/#t185-109)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 5.5 Nm | Bolts are microencapsulated and must always be renewed after loosening. · Qty. 6 |
| 6 | Bolt | 2.5 Nm | For the cover · Qty. 3 |
| 8 | Bolt | 4 Nm | For sliding sunroof motor. · Qty. 3 |
| 11 | Bolt | 3 Nm | Bolts are microencapsulated and must always be renewed after loosening. · Qty. 13 |
| 14 | Bolt | 2 Nm | For wind deflector. · Qty. 2 |

### [1.3 Assembly overview – sunroof roller blind](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/assembly-overview-sunroof-roller-blind/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/assembly-overview-sunroof-roller-blind/#t187-82)
**All items:** Qty. 2 · Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2.5 Nm | For sun blind |
| 11 | Bolt | 1 Nm | For the handle |

### [1.6 Removing and installing wind deflector](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-wind-deflector/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Insert and tighten bolts -4- on left and right, specified torque: 1.5 Nm. | 1.5 Nm |

### [1.7 Removing and installing glass panel](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-glass-panel/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench 210 Nm - V.A.G 1783- | 210 Nm |
| After adjusting panel height, tighten securing screws -5- (5.5 Nm). | 5.5 Nm |

### [1.9 Adjusting glass panel](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/adjusting-glass-panel/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten the front inside bolts (5.5 Nm). | 5.5 Nm |
| Tighten the rear inside bolts (5.5 Nm). | 5.5 Nm |
| Open glass panel and tighten the rear bolts (5.5 Nm). | 5.5 Nm |

### [1.10 Removing and installing guide plate](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-guide-plate/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Specified torque for bolts -2-: 2 Nm. | 2 Nm |
| Specified torque for bolts -3-: 3 Nm. | 3 Nm |
| Specified torque for bolts -4-: 3.5 Nm. | 3.5 Nm |

### [1.12 Removing and installing sliding sunroof adjustment control unit J245](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-sunroof-control-unit-j245/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench 210 Nm - V.A.G 1783- | 210 Nm |
| Fit drive -1-, and tighten bolts -4-. Specified torque: 4 Nm. | 4 Nm |

### [1.15 Removing and installing cover](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-cover/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench 210 Nm - V.A.G 1783- | 210 Nm |
| Tighten bolts -2-. Specified torque: 2.5 Nm. | 2.5 Nm |

### [1.17 Removing and installing sunroof roller blind](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-sunroof-roller-blind/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench 210 Nm - V.A.G 1783- | 210 Nm |
| Tighten bolts -5-. Specified torque: 2.5 Nm. | 2.5 Nm |
| Fit handle -4- and tighten screws -3-. Specified torque: 1 Nm. | 1 Nm |

### [1.18 Removing and installing tension bow](https://catalog.polo.blue/repair-manuals/body-exterior/60-sunroof/removing-and-installing-tension-bow/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Fit handle -4- and tighten screws -3-. Specified torque: 1 Nm. | 1 Nm |

## 63 – Bumpers

### [1.1 Assembly overview – bumper cover](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/index.md)

#### 1.1.1 Assembly overview – bumper cover, Polo, »standard« equipment version [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/#1-1-1-assembly-overview-bumper-cover-polo-standard-equipment)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 2 · Bolted to lock carrier. |
| 4 | Bolt | 2 Nm | Left and right · Points upwards. |
| 5 | Bolt | 2 Nm | Qty. 5 on each side · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 3 · Bolted to lock carrier. |

#### 1.1.2 Assembly overview – bumper cover, Polo BlueMotion [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/#1-1-2-assembly-overview-bumper-cover-polo-bluemotion)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 2 · Bolted to lock carrier. |
| 4 | Bolt | 2 Nm | Qty. 1 on each side · Points upwards. |
| 5 | Bolt | 2 Nm | Qty. 5 on each side · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 3 · Bolted to lock carrier. |

#### 1.1.3 Assembly overview – bumper cover, CrossPolo [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/#1-1-3-assembly-overview-bumper-cover-crosspolo)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 2 · Bolted to lock carrier. |
| 4 | Bolt | 2 Nm | Left and right · Points upwards. |
| 5 | Bolt | 2 Nm | Qty. 5 on each side · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 3 · Bolted to lock carrier. |

#### 1.1.4 Assembly overview – bumper cover, Polo »GTI« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/#1-1-4-assembly-overview-bumper-cover-polo-gti)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 2 · Bolted to lock carrier. |
| 4 | Bolt | 2 Nm | Left and right · Points upwards. |
| 5 | Bolt | 2 Nm | Qty. 5 on each side · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 3 · Bolted to lock carrier. |

#### 1.1.5 Assembly overview – bumper cover, Polo »R-Line« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover/#1-1-5-assembly-overview-bumper-cover-polo-r-line)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolts | 2 Nm | Qty. 2 · Bolted to lock carrier. |
| 4 | Bolts | 2 Nm | Left and right · Points upwards. |
| 5 | Bolts | 2 Nm | Qty. 5 on each side · Bolted to wheel housing liner. |
| 6 | Bolts | 2 Nm | Qty. 3 · Bolted to lock carrier. |

### [1.2 Assembly overview – impact bar](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-impact-bar/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 8 Nm | Qty. 2 each on left and right. |
| 4 | Bolt | 8 Nm | Qty. 2 each on left and right. |
| 5 | Bolt | 8 Nm | Qty. 2 on each side |
| 7 | Bolt | 30 Nm | Qty. 3 on each side |
| 8 | Bolt | 8 Nm | Qty. 2 |

### [1.3 Assembly overview – add-on parts](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-add-on-parts/index.md)

#### 1.3.5 Assembly overview – add-on parts, Polo »R-Line« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-add-on-parts/#1-3-5-assembly-overview-add-on-parts-polo-r-line)
| Item | Part | Torque |
| --- | --- | --- |
| 13 | Bolt | 2 Nm |

### [2.1 Assembly overview – bumper cover](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/index.md)

#### 2.1.1 Assembly overview – bumper cover, Polo, »standard« equipment version [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/#2-1-1-assembly-overview-bumper-cover-polo-standard-equipment)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Left and right · Points upwards. · Bolted to side panel. |
| 4 | Bolt | 2 Nm | Qty. 4 · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 2 on each side · Bolted to rear panel. |

#### 2.1.2 Assembly overview – bumper cover, Polo BlueMotion [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/#2-1-2-assembly-overview-bumper-cover-polo-bluemotion)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Left and right · Points upwards. · Bolted to side panel. |
| 4 | Bolt | 2 Nm | Qty. 4 · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 2 · Bolted to rear panel. |

#### 2.1.3 Assembly overview – bumper cover, CrossPolo [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/#2-1-3-assembly-overview-bumper-cover-crosspolo)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Left and right · Points upwards. · Bolted to side panel. |
| 4 | Bolt | 2 Nm | Qty. 4 · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 2 · Bolted to rear panel. |

#### 2.1.4 Assembly overview – bumper cover, Polo GTI, Polo BlueGT [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/#2-1-4-assembly-overview-bumper-cover-polo-gti-polo-bluegt)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Left and right · Points upwards. · Bolted to side panel. |
| 4 | Bolt | 2 Nm | Qty. 4 · Bolted to wheel housing liner. |
| 6 | Bolt | 2 Nm | Qty. 2 · Bolted to rear panel. |

#### 2.1.5 Assembly overview – bumper cover, Polo »R-Line« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-bumper-cover-2/#2-1-5-assembly-overview-bumper-cover-polo-r-line)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolts | 2 Nm | Left and right · Points upwards. · Bolted to side panel. |
| 4 | Bolts | 2 Nm | Qty. 4 · Bolted to wheel housing liner. |
| 5 | Bolts | 2 Nm | Qty. 2 · Bolted to rear panel. |

### [2.2 Assembly overview – impact bar](https://catalog.polo.blue/repair-manuals/body-exterior/63-bumpers/assembly-overview-impact-bar-2/index.md)

#### Torque
**All except 8:** Qty. 3 on each side

**All except 2:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Hexagon nuts | 20 Nm |  |
| 5 | Bolts | 2 Nm |  |
| 8 | Bolts | 2 Nm | Qty. 4 |

## 64 – Glazing

### [5.1 Assembly overview – front door window](https://catalog.polo.blue/repair-manuals/body-exterior/64-glazing/assembly-overview-front-door-window/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/64-glazing/assembly-overview-front-door-window/#t336-180)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Hexagon nut | 8 Nm | Qty. 4 |
| 6 | Bolt | 3 Nm | Qty. 3 |

### [5.2 Assembly overview – rear door window](https://catalog.polo.blue/repair-manuals/body-exterior/64-glazing/assembly-overview-rear-door-window/index.md)

#### Torque [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/64-glazing/assembly-overview-rear-door-window/#t337-82)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 5 | Hexagon nut | 8 Nm | Qty. 2 |
| 8 | Bolt | 3 Nm | Qty. 3 |

### [5.3 Removing and installing front door window](https://catalog.polo.blue/repair-manuals/body-exterior/64-glazing/removing-and-installing-front-door-window/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolts -3-, (qty. 2), specified torque: 8 Nm. | 8 Nm |

## 66 – Exterior equipment

### [1 Radiator grille and front trim](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/radiator-grille-and-front-trim/index.md)

#### 1.1.2 Assembly overview - radiator grille [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/radiator-grille-and-front-trim/#1-1-2-assembly-overview-radiator-grille)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolts | 2 Nm | Qty. 2 |
| 5 | Bolt | 2 Nm |  |

### [2.1 Assembly overview – spoiler](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-spoiler/index.md)

#### 2.1.2 Assembly overview – spoiler, Polo »GTI« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-spoiler/#2-1-2-assembly-overview-spoiler-polo-gti)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 4 | Bolt | 10 Nm | Qty. 6 |

### [3.1 Assembly overview – side member trim](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-side-member-trim/index.md)

#### 3.1.1 Assembly overview - side member trim, Polo »BlueMotion«, Polo »Blue GT« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-side-member-trim/#3-1-1-assembly-overview-side-member-trim-polo-bluemotion-pol)
**All except 5:** Qty. 1 on each side · Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm |  |
| 4 | Bolt | 2 Nm |  |
| 5 | Self-cutting screw | 1.2 Nm | Qty. 8 on each side · Specified torque:  - 0.1 Nm |

#### 3.1.2 Assembly overview - side member trim, Cross Polo [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-side-member-trim/#3-1-2-assembly-overview-side-member-trim-cross-polo)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Qty. 1 on each side · Specified torque |
| 5 | Self-cutting screw | 1.2 Nm | Specified torque:  - 0.1 Nm |

#### 3.1.3 Assembly overview – side member trim, Polo »GTI« [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-side-member-trim/#3-1-3-assembly-overview-side-member-trim-polo-gti)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 1 on each side · Specified torque |
| 5 | Self-cutting screw | 1.2 Nm | Specified torque:  - 0.1 Nm |

### [3.10 Removing and installing retaining strip for side member trim](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-retaining-strip-for-side-member-trim/index.md)

#### 3.10.2 Removing and installing retaining strip for side member trim, CrossPolo, Polo »GTI« [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-retaining-strip-for-side-member-trim/#3-10-2-removing-and-installing-retaining-strip-for-side-memb)
| Step | Torque |
| --- | --- |
| Tighten screws with least possible torque, i.e. 1.2 Nm - 0.1 Nm, so that screws are not excessively tightened. | 1.2 Nm / 0.1 Nm |

### [3.14 Removing and installing C-pillar trim on door](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-c-pillar-trim-on-door/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolt -2-, specified torque: 1 Nm. | 1 Nm |

### [3.16 Removing and installing front wheel arch trim](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-front-wheel-arch-trim/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolt -2- to specified torque of 2 Nm. | 2 Nm |

### [3.17 Removing and installing rear wheel arch trim](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-rear-wheel-arch-trim/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Tighten bolt 2 to specified torque of 2 Nm. | 2 Nm |

### [4.1 Assembly overview – noise insulation](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-noise-insulation/index.md)

#### 4.1.1 Assembly overview - noise insulation, diesel engines [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-noise-insulation/#4-1-1-assembly-overview-noise-insulation-diesel-engines)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 4 on each side · Specified torque |

#### 4.1.2 Assembly overview – noise insulation, long version [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-noise-insulation/#4-1-2-assembly-overview-noise-insulation-long-version)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 9 · Specified torque |

#### 4.1.3 Assembly overview - noise insulation, short version [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-noise-insulation/#4-1-3-assembly-overview-noise-insulation-short-version)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 3 on each side · Specified torque |

### [5 Underbody cladding](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/underbody-cladding/index.md)

#### 5.1 Assembly overview - underbody cladding [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/underbody-cladding/#5-1-assembly-overview-underbody-cladding)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Hexagon nut | 2 Nm | Qty. 9 · Specified torque |

#### 5.2 Assembly overview - tunnel cross-piece [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/underbody-cladding/#5-2-assembly-overview-tunnel-cross-piece)
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Hexagon nut | 20 Nm | Qty. 4 on each side · Specified torque |

### [6 Roof moulding and roof railing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/roof-moulding-and-roof-railing/index.md)

#### 6.1 Assembly overview - roof railing [To the drawing](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/roof-moulding-and-roof-railing/#6-1-assembly-overview-roof-railing)
**All items:** Specified torque

| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Hexagon nut | 9 Nm | Qty. 2 each on left and right at front |
| 4 | Hexagon nut | 9 Nm | Qty. 2 each on left and right at rear |

### [7.1 Assembly overview – exterior mirror](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-exterior-mirror/index.md)

#### Torque
**All items:** Qty. 3

| Item | Part | Torque |
| --- | --- | --- |
| 3 | Bolt | 1 Nm |
| 8 | Bolt | 1 Nm |

### [7.2 Removing and installing exterior mirror](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-exterior-mirror/index.md)

#### 7.2.1 Removing and installing exterior mirror, manually operated [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-exterior-mirror/#7-2-1-removing-and-installing-exterior-mirror-manually-opera)
| Step | Torque |
| --- | --- |
| Tighten bolt -4-. Specified torque: 12 Nm. | 12 Nm |
| Tighten securing nut -6-. Specified torque: 1.5 Nm. | 1.5 Nm |

#### 7.2.2 Removing and installing exterior mirror, electrically operated [To the steps](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-exterior-mirror/#7-2-2-removing-and-installing-exterior-mirror-electrically-o)
| Step | Torque |
| --- | --- |
| Tighten bolt -4-. Specified torque: 12 Nm. | 12 Nm |

### [7.4 Removing and installing mirror adjustment unit](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-mirror-adjustment-unit/index.md)

#### In the steps
| Step | Torque |
| --- | --- |
| Torque wrench 210 Nm - V.A.G 1783- | 210 Nm |
| Specified torque for bolts -3-: 2 Nm. | 2 Nm |

### [8.1 Assembly overview – front wheel housing liner](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-front-wheel-housing-liner/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 3 | Bolt | 2 Nm | Qty. 13 · Specified torque |

### [8.2 Assembly overview – rear wheel housing liner](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-rear-wheel-housing-liner/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 2 | Bolt | 2 Nm | Qty. 10 · Specified torque |

### [9.4 Removing and installing badges on front](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-badges-on-front/index.md)

#### 9.4.3 Removing and installing front emblems, Polo BlueGT [To the table](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/removing-and-installing-badges-on-front/#9-4-3-removing-and-installing-front-emblems-polo-bluegt)
| Part | Torque |
| --- | --- |
| Badge | 2.0 Nm |

### [11.1 Assembly overview – towing bracket](https://catalog.polo.blue/repair-manuals/body-exterior/66-exterior-equipment/assembly-overview-towing-bracket/index.md)

#### Torque
| Item | Part | Torque | Notes |
| --- | --- | --- | --- |
| 6 | Bolt | 50 Nm +90° | Qty. 2 on each side · Always renew bolts after loosening |
